A 100 lb tank is too heavy to carry.
A full 100 lb propane cylinder weighs close to 170 pounds. You cannot lift it. You cannot drag it. You need a way to roll it.
- ▪ A full tank weighs ~170 lbs. The cylinder itself is empty at about 68 lbs. When full of propane, you are dealing with close to 170 pounds. That is not a lift.
- ▪ Dragging a tank scratches it. Tilt and slide it across concrete, and you scuff the coating, dent the foot ring, and wear the valve guard.
- ▪ Bending and lifting strains your back. One bad lift and you are done for the weekend. A cart turns the whole job into a roll.
- ▪ A cart makes it one person. Roll it from the storage shed to the grill, to the RV, to the exchange station. No help needed.
A hand truck built for one job.
Set the tank in the cradle, clip the chain, tilt the handle, roll. That is the whole product.
Welded steel tubing, not flimsy folded sheet. Powder coated black so it does not rust in the weather.
10 inch air-filled tires. They roll over grass, cracks in the pavement, and gravel. No flat spots.
A steel chain loops around the tank and clips to the frame. The tank stays put when you tilt and roll.
Ergonomic handle at standing height. Tilt and push, no reaching down.
Built to roll heavy, in the weather.
The frame is steel, the wheels are rubber, the chain is real. Everything else is welding and finish.
- ▪ Welded steel tubing. The frame is welded, not bolted thin sheet. It does not flex or twist under load.
- ▪ Black powder coat. Powder coated, not painted. The finish chips less and lasts longer outside.
- ▪ Pneumatic 10 inch tires. Air-filled rubber absorbs bumps. Much smoother than hard plastic wheels.
- ▪ Steel hubs and bearings. The wheels ride on steel hubs with bearings, not plastic bushings that seize.
Set, chain, tilt, roll.
Four steps, and the tank moves. It is a hand truck, not a machine.
Roll the empty cart up to the tank. Set the tank into the cradle so the foot ring sits on the frame.
Wrap the safety chain around the tank body and clip it to the frame. Pull it snug so the tank cannot slide.
Grab the handle and tilt the cart back. The weight transfers onto the wheels. The tank lifts off the ground.
Push to where you want it. Tilt it back down, set the tank level, unclip the chain.
What it fits, and what it does not.
It is built for standard 100 lb propane cylinders. Other sizes may fit, but measure first.
| Use it for | Fits | Note |
|---|---|---|
| 100 lb propane cylinders | Standard 100 lb (approx. 45 kg) vertical tanks | Foot ring and body diameter match the cradle. |
| Grill and patio use | Rolling from storage to grill to exchange | Pneumatic wheels handle grass and pavement. |
| Storage and moving | Shed, garage, RV pad | Folds flat for storage when not in use. |
| 20 lb or 30 lb tanks | — | Smaller tanks sit too low in the cradle. This cart is sized for the 100 lb class. |
| Towing behind a vehicle | — | It is a hand cart, not a trailer. Do not tow it. |
Note: Always close the tank valve and secure the chain before moving. Do not leave the tank unattended on the tilted cart.
Three ways to move a 100 lb tank.
Same tank, same spot, and the real difference in effort and damage.
| At a glance | This steel cart | Plastic dolly | Drag it on the ground | Lift it by hand |
|---|---|---|---|---|
| Weight capacity | 100 lb tank (~170 lb loaded) | 50 lb class, flexes | No limit, but scratches | No, too heavy |
| Ride quality | Pneumatic wheels, smooth | Hard plastic, bumpy | Rough, drags | N/A |
| Tank protection | Cradle and chain secure | Loose fit | Foot ring and valve scrape | Risk of dropping |
| Back strain | None, tilt and roll | Some | Moderate | High, injury risk |
| Expected life | Years, steel frame | 1 to 2 seasons | Tank wears out | N/A |
What you get, in plain numbers.
Frame, wheels, capacity, and what is included.
| Specification | Value |
|---|---|
| Frame material | Welded steel tubing, black powder coat |
| Tank capacity | Up to 100 lb (approx. 45 kg) propane cylinder |
| Wheel size | 10 inch pneumatic rubber tires, steel hubs |
| Handle | Curved steel push handle |
| Security | Steel safety chain with clip |
| Weight | Approx. 18 lbs (8 kg) |
| Color | Black |
| Assembly | Simple assembly, hardware included |
Propane cylinder cart frame, two pneumatic wheels, safety chain, assembly hardware.
Tank is not included. This is the cart only. Close the tank valve before moving. Secure with the chain.
Four rules that keep the cart and tank safe.
A cart is simple, but gas tanks are not. A few habits keep everyone safe.
- ▪ Close the valve before moving. Always shut the tank valve before you roll it. A moving tank with an open valve is a leak waiting to happen.
- ▪ Chain the tank every time. Do not skip the chain. A tank sliding off a tilted cart can dent the valve or break it.
- ▪ Park on level ground. Set the cart down on flat ground. Do not leave a loaded tank on a slope.
- ▪ Wipe the frame after rain. Powder coat is tough, but a wiped frame lasts longer. Dry the chain so it does not rust.
If you have a standard 100 lb vertical propane cylinder, yes. The cradle is sized for that class of tank.
Basic tools are included or standard household tools. It assembles in about 15 minutes.
Yes. The pneumatic wheels are designed for grass, gravel and pavement. Hard plastic wheels would get stuck.
About 18 lbs. It is light enough to carry, but built for a 170 lb loaded tank.
No. This listing is for the cart only. The propane tank is not included.
- ▪ Heavy-duty steel cart for 100 lb propane cylinders.
- ▪ Pneumatic wheels roll over grass, gravel and pavement.
- ▪ Safety chain secures the tank. Tilt and roll, one person.
- ▪ Black powder coat, rust resistant. Tank not included.
Steel propane cylinder cart, pneumatic wheels, safety chain, black powder coat, for 100 lb LP tanks.
Reviews
There are no reviews yet.