Sale!

Single Monitor Arm Desk Mount, VESA 75/100, Gas Spring, Fits 17-27 inch

Original price was: $113.00.Current price is: $79.68.

A single gas-spring monitor arm for VESA 75 and 100 mounts, fitting 17 to 27 inch screens up to 8 kg. Adjustable height, tilt and 180-degree swivel with a clamp mount and cable management; installs in about ten minutes and frees desk space.

Category:
VESA 75/100Gas springUp to 27 inchClamp mountCable management
Single monitor arm desk mount on white background
Stock monitor stand eating your desk?
Why it matters

The stock monitor stand takes up half your desk.

Big plastic base, fixed height, no adjustment. You hunch over, your desk is cluttered, and your neck hurts after a long day.

  • ▪  The base is big.
  • ▪  The stock stand base takes up 20 by 15 cm of desk space. Gone with an arm.
  • ▪  Height is fixed.
  • ▪  If the monitor is too low, you hunch. If too high, you crane. An arm lets you set it right.
  • ▪  No tilt or swivel.
  • ▪  You cannot tilt the screen or turn it toward a coworker. An arm moves freely.
  • ▪  An arm fixes all of it.
  • ▪  Floating monitor, adjustable height, tilt, swivel. Better posture, cleaner desk.
Split comparison: monitor on bulky stand on the left, monitor on arm on the right
Left: cluttered. Right: clean.
What it does

Float your monitor at the perfect height.

Gas spring arm, smooth movement, rock solid when set.

Clean desk with monitor mounted on arm showing freed up space
Floating monitor, clean desk, better posture.
01
Gas spring arm

Smooth up and down movement. Set it where you want, it stays.

02
VESA 75 and 100

Fits 75×75 and 100×100 VESA patterns. Most monitors from 17 to 27 inch.

03
Clamp or grommet

Clamps to desk edge up to 6 cm thick. Or use the grommet mount for a hole.

04
Cable management

Built in clips route the monitor cables along the arm. No loose wires.

Build & material

The details that matter.

Cheap arms sag and wobble. This one is solid aluminum.

Close-up of the monitor arm joint showing the aluminum casting
Aluminum, gas spring, cable clip.
  • ▪  Aluminum arm.
  • ▪  Light but rigid. Does not sag under monitor weight.
  • ▪  Gas spring.
  • ▪  Smooth one finger adjustment. No tools needed after setup.
  • ▪  Tilt and swivel.
  • ▪  Tilt plus or minus 85 degrees. Swivel 180 degrees. Rotate portrait.
  • ▪  Rubber padding.
  • ▪  The clamp pads protect your desk from scratches.
How to install

Clamp it on, bolt the monitor. Four steps.

No drilling, no special tools.

01
Clamp the base

Attach the clamp to your desk edge. Tighten the screw by hand.

02
Attach VESA plate

Screw the VESA plate to the back of your monitor. Four screws included.

03
Mount monitor

Lift the monitor and hook it onto the arm. Tighten the lock screw.

04
Adjust height

Set the monitor to eye level. Tilt and swivel as needed. Done.

Hands adjusting the monitor arm height
One finger adjustment, gas spring smooth.
Specifications

What you get, in plain numbers.

Weight, size, VESA, and what is in the box.

Specification Value
Product Single monitor arm desk mount
Material Aluminum alloy, steel
Fits monitor size 17 to 27 inch
Weight capacity Up to 8 kg (17.6 lbs)
VESA 75×75 mm and 100×100 mm
Height adjustment 0 to 40 cm above desk
Tilt Plus or minus 85 degrees
Swivel 180 degrees

Note: Check your monitor VESA pattern and weight before ordering.

How it compares

Three ways to hold your monitor.

Same monitor, three mounts.

At a glance Monitor arm Stock stand Wall mount
Cost $50 to $70 $0 (included)
Height adjust Yes, gas spring No
Desk space Frees up Takes up
Install Clamp, 10 min Out of box
What’s in the box

Arm, clamp, plate, screws.

No surprises. Everything you need to mount one monitor.

Specification Value
Product Single monitor arm
Color Black
Material Aluminum and steel
Includes Arm, desk clamp, VESA plate, mounting screws, Allen wrench
Desk thickness Up to 6 cm (2.4 in)
Cable clips Included
Warranty 1 year
What you get

One monitor arm, desk clamp, VESA plate, screws, and Allen wrench. Monitor not included.

Please note

Check your monitor VESA pattern and weight. This arm fits 17 to 27 inch monitors up to 8 kg.

Care & tips

Four rules that keep the arm solid.

A monitor arm lasts years with basic care.

  • ▪  Tighten the clamp monthly.
  • ▪  The clamp can loosen with use. Give it a twist once a month.
  • ▪  Do not overload.
  • ▪  Stick to the 8 kg limit. Overloading makes the arm sag.
  • ▪  Route cables properly.
  • ▪  Use the built in clips. Do not let cables hang free.
  • ▪  Clean with a dry cloth.
  • ▪  Wipe the arm with a dry or slightly damp cloth. No chemicals.
Flat lay of monitor arm components, VESA plate, clamp, wrench and screws
Arm, clamp, plate, screws. Everything in the box.
Will this fit my monitor?

If your monitor has VESA 75×75 or 100×100 holes on the back, yes. Most 17 to 27 inch monitors do.

Can I mount two monitors?

This is a single monitor arm. For two monitors, you need a dual arm.

Does it fit a 34 inch ultrawide?

This arm fits up to 27 inch. For a 34 inch ultrawide, you need a heavier duty arm.

Do I need tools?

Only the included Allen wrench. No drilling, no special tools.

Can I use the grommet mount?

Yes. The clamp works on desk edges up to 6 cm. The grommet mount is for desks with a cable hole.

The short version
  • ▪  Single monitor arm desk mount, VESA 75 and 100.
  • ▪  Gas spring, adjustable height, tilt, swivel.
  • ▪  Fits 17 to 27 inch monitors up to 8 kg.
  • ▪  Clamp mount, cable management, easy install.
Floating monitor, clean desk, better posture.

Single monitor arm desk mount, VESA 75/100, gas spring, up to 27 inch.

Reviews

There are no reviews yet.

Be the first to review “Single Monitor Arm Desk Mount, VESA 75/100, Gas Spring, Fits 17-27 inch”

Your email address will not be published. Required fields are marked *

Scroll to Top